# Configuring Wi-Fi Country and Antenna Gain Settings

Wireless regulations vary from country to country. To ensure that the MikroTik radios are operating in compliance with local regulations, the country profile and antenna gain must be correctly configured in the radio settings.

* Omnitrack and BaseStation Plus wireless settings are set to comply with United States wireless regulations by default.
* BlueBoat and BaseStation wireless settings are set to comply with United States wireless regulations by default.

1. The radio settings can be configured using [WinBox](https://mikrotik.com/download) or through the radio's web browser-based user interface. In a browser, type in the radio's [default IP address](https://app.gitbook.com/o/ObqHkwNyPYYuN5SMJXLW/s/iGep5P4JoGKQtExRT40W/standard-blue-robotics-ecosystem-internet-protocol-ip-addresses) to access the web interface.

2. From WinBox or the web interface, click on **WebFig** from the upper right corner.\ <br>

   <figure><img src="/files/sFU6OTQ5PTXUCTuMa3PG" alt=""><figcaption></figcaption></figure>

3. On the next screen, click on **Wireless** from the left sidebar then select the **wlan1** interface.\ <br>

   <figure><img src="/files/QHcQbrnldvR83XDxEs8j" alt=""><figcaption></figcaption></figure>

4. On the following screen, scroll down until you see the **Country** setting. Select the country you are operating in from the dropdown menu. Some countries have more than one associated setting. In this case, use the recommended country setting listed in the table below.\ <br>

   <figure><img src="/files/sHl361mQZKdVFSUk7yxm" alt=""><figcaption></figcaption></figure>

   <br>

   <figure><img src="/files/UyEpwElp40iHxtsABUOm" alt=""><figcaption></figcaption></figure>

5. Scroll down a little bit to the **Antenna Gain** field and enter the value listed in the table below. Please note that these values only apply if you are using the stock omnidirectional antenna.\ <br>

   <figure><img src="/files/lpswHhh29jgqkPdKwBes" alt=""><figcaption></figcaption></figure>

6. Scroll back to the top of the page and click on **OK** to save the settings.\
   ​

   <figure><img src="/files/Zf5itPwK3qrqjO4GdoCj" alt=""><figcaption></figcaption></figure>

7. After the setting has been confirmed, expand the **System** menu from the left sidebar, then click **Reboot**. Confirm your selection by clicking **OK**.\ <br>

   <figure><img src="/files/vuViU5XwzIgwMxL9uUpn" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.ceruleansonar.com/c/basestation-plus-network-hub/connecting-the-basestation-plus-to-a-pc/configuring-wi-fi-country-and-antenna-gain-settings.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.