# Battery for DIY Wi-Fi

{% hint style="info" %}
Cerulean does not offer batteries due to the difficulty in storing and shipping them.
{% endhint %}

If using a battery for Ethernet power injection, we recommend using a Lithium-Ion (Li-Ion) battery rather than Lithium-Polymer (Li-Po) or other battery technologies.

The battery should be 14.8V nominal and at least 2000 mAH capacity. We supply an adapter for batteries with XT-60 output connectors in our POE kit.

We have tested the [battery shown below](https://web.archive.org/web/20250118061601/https://www.getfpv.com/zohd-lionpack-18650-4s1p-3500mah-14-8v-li-ion-battery.html) in our system, and it or an equivalent is a good choice.

<figure><img src="/files/c2NNyjrl0GoBsJlLS8MT" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.ceruleansonar.com/c/ethernet-rov-locator/connecting-and-powering-your-rovle-ethernet-receiver-or-transceiver/battery-for-diy-wi-fi.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.