> For the complete documentation index, see [llms.txt](https://docs.ceruleansonar.com/c/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.ceruleansonar.com/c/ethernet-rov-locator/connecting-and-powering-your-rovle-ethernet-receiver-or-transceiver/example-diy-power-wi-fi-setup-for-remote-usage.md). # Example DIY Power/Wi-Fi Setup for Remote Usage The setup described here is an example of creative wiring. This setup provides power to a ROVLe receiver or transceiver and a long-range Wi-Fi link back to the ROV topside controls. It consists of: * [A Mikrotik GrooveA 52 long range transceiver and antenna](https://bluerobotics.com/store/boat/blueboat-components-spares/blueboat-wifi-router/), compatible with the BlueBoat long-range Wi-Fi (so a BlueBoat Base Station can be connected to). * A 14.8V Li-Ion battery pack [(this is an example)](https://web.archive.org/web/20250118061601/https://www.getfpv.com/zohd-lionpack-18650-4s1p-3500mah-14-8v-li-ion-battery.html) * Ethernet POE injectors * A power switch (not shown) * A Blue Robotics watertight enclosure, sized for the Mikrotik and Li-Ion battery you pick With relatively little custom wiring this unit can supply the POE connection to the ROVLe device. It could then be used with a remotely-deployed ROVLs topside system. {% hint style="info" %} Cerulean Sonar does not sell these components as a kit or product. {% endhint %}