Ethernet / Power over Ethernet (POE)
The Manifold 5S has five Ethernet connectors.
Three connectors marked "ETHER" that are always usable as Ethernet connections to the switch (circled in red in image below).
One connector marked "XETH1", which can be used as an Ethernet connection to the switch only if the Brain is not installed (connector circled in red in image below).
One connector marked "XETH2", which can be used as an Ethernet connection to the switch only if the Tether Interface is not installed (connector circled in red in image below).
Pinout of the Ethernet connectors follow the Blue Robotics connector standard.
There are four power outputs for your POE devices.
Last updated