Assembly Step 3: Transceiver

Line up the transceiver and the grip and slide the grip over the transceiver body. As you do, make sure the arrow on the grip is pointing at the arrow on the top of the transceiver (second image below). The transceiver should catch on alignment features on the grip in the correct Z rotation when the transceiver is correctly fully engaged with the grip. Hold everything in place and put the small hose clamp around the grip to hold the transceiver. DO NOT OVERTIGHTEN. It just needs to be tight enough to keep the transceiver from slipping. Then, install the grip retainer bolt. Don't over-tighten the bolt.