For the complete documentation index, see llms.txt. This page is also available as Markdown.
Assembly Step 4: Pin Antenna Arm, Install Battery Case
Fold the antenna arms out and install the antenna arm bolts. Don't over-tighten the bolts.
Loop the two battery/Wi-Fi enclosure hose clamps through the enclosure mounts. Lay the enclosure on the mounts inside the hose clamps. Loosely tighten the clamps. Loosely install the float-side Wi-Fi antenna (the one with the hinge) on the type N connector. Snap the antenna in the antenna support, tighten the N connector, and then tighten the hose clamps while ensuring the antenna is vertical.
