# IP-ADDRESS The IP-ADDRESS command stores or erases a static IP address for the DVL for use during the next boot-up. Setting an address of 0.0.0.0:0 erases any current static IP address, and the DVL will attempt to use DHCP to get an IP address next boot-up, resorting to the fallback address if DHCP fails. Note, the IP broadcast address 255.255.255.255 cannot be used as a static IP address for the DVL. Examples: IP-ADDRESS 192.168.2.8 IP-ADDRESS 0.0.0.0 --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.ceruleansonar.com/c/tracker-650/communicating-with-the-tracker-650/commands-accepted-by-the-tracker-650/ip-address.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.