# SET-VELOCITY-ADJUSTMENT The SET-VELOCITY-ADJUSTMENT command sets an overall global adjustment in measured velocity. Velocity as measured at each transducer is multiplied by the velocity adjustment factor before being used in any calculations. The DVL accepts velocity adjustments between 0.8 and 1.25 inclusive, and the value is stored in flash memory until a new value is received. Example: SET-VELOCITY-ADJUSTMENT 1.001 --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.ceruleansonar.com/c/tracker-650/communicating-with-the-tracker-650/commands-accepted-by-the-tracker-650/set-velocity-adjustment.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.