📖
Cerulean Sonar Docs
Docs DirectoryStore
Tracker 650
Tracker 650
  • Overview
    • CERULEANTRACKER DEPRECATION NOTICE
  • Quick Start for BlueROV / ArduSub Users
  • General Specifications
  • Configuring the Tracker 650
    • Finding the Configuration Web Page
    • Example Configuration Web Page
    • Live Status Page
    • Setting the Static IP Address
    • Setting the Fallback IP Address
    • Setting the Host IP Address
    • Setting the MAVLink REST Server Parameters
    • Setting Pool Mode
    • Setting DVL Mounting Rotation Offsets
      • Scenario: Driving Your Own Kalman Filter
        • Forward-Facing Mount
    • Setting Velocity Adjustment
  • General Usage
    • General Hints and Tips
    • Basic Operating Guidelines and Hints
    • Setting Speed of Sound
    • Scenario: Doing Your Own Dead Reckoning
    • Scenario: Holding Position
  • Using MAVLink and BlueOS for Position Hold on a BlueROV2
    • ArduPilot Parameters
    • Tracker 650 Setup for MAVLink Support
    • Global Origin
  • Mounting the Tracker 650
    • Bottom Mount
    • Thruster Deck Mount
      • Send xxx Message
  • Mounting Drawings (V1 pre-2025)
  • Communicating with the Tracker 650
    • Factory Defaults and Default Messages
    • The Ethernet Interface
    • Tips on How to Find the IP Address Assigned to Your Ethernet Adapter
    • Outgoing Message Formats, Tracker 650 to Host
      • $DVPDL and $DVPDX: DVL Position and Angle Deltas Messages
      • $DVNVM Non-Volatile Memory and Configuration
      • Freeform Error and Informational messages ($DVTXT)
      • $DVKFC Kalman Filter Raw Data Support Message
    • Commands Accepted by the Tracker 650
      • CONFIGURATION
      • SET-VELOCITY-ADJUSTMENT
        • SET-SPEED-OF-SOUND
      • SEND-DVPDL
      • SEND-DVPDX
      • SEND-DVKFC
      • SEND-MAVLINK-DISTANCE
      • MAVLINK-ORIGIN
      • SET-POSITION
      • SET-SENSOR-ORIENTATION
      • IP-ADDRESS
      • HOST-ADDRESS
      • MAVLINK-ADDRESS
      • FALLBACK-ADDRESS
      • UNICAST-TO-ME
      • PAUSE
      • RESUME
      • REBOOT
      • SET-POOL-MODE
    • Blue Robotics Discovery Protocol (Ethernet Only)
    • ARP (Address Resolution Protocol)
    • DHCP (Dynamic Host Configuration Protocol)
    • Ping (Internet Control Message Protocol Ping)
  • Coordinate Systems
  • Mounting Drawings (V2 post-2024)
  • CAD Models
  • Electrical Drawings
    • Power and Ethernet Cabling
  • Expectations
  • Copyright
Powered by GitBook
On this page
  1. Communicating with the Tracker 650
  2. Outgoing Message Formats, Tracker 650 to Host

Freeform Error and Informational messages ($DVTXT)

The Tracker 650 may output quite a few informational messages that are not needed for navigation, but which may make integration and debugging easier. There are no periodic freeform messages. You can liken it to a Unix or Linux boot console display. Most of it will look like gibberish to you, some of it will make sense if you’re having a problem of some sort, and all of it can be ignored until there is a problem and you need to call the factory for help. You will see more boot messages on the serial port; these are output before the Ethernet link is established and mostly report on Ethernet link establishment progress.

Many freeform messages are packaged in an NMEA-type $DVTXT packet.

Nearly all freeform messages are formatted as an NMEA message starting with $DVTXT.

Example:

$DVTXT,Firmware release version Aug 22 2023

Previous$DVNVM Non-Volatile Memory and ConfigurationNext$DVKFC Kalman Filter Raw Data Support Message

Last updated 3 months ago