Interface via a BlueBoat

If you mount the Omnitrack system on BlueBoat, you can order a wiring harness that connects to the BlueBoat battery for power, and the BlueBoat Ethernet switch to get Omnitrack data onto the BlueBoat's wireless connection to the operator.

In this scenario you need the RED cables. Note some system components not shown for clarity.

You will need to make a connection between the BlueBoat BaseStation network and the ROV network at the topside.

A Blue Robotics BlueBoat BaseStation is shown in the image below. It's also possible to use a Cerulean BaseStation Plus device which would include the functions of the Ethernet switch and BlueROV Tether interface.