Specifications

Common Parameter	Omniscan 450 FS and SS
Viewing Software	SonarView by Cerulean
Frequency	450 kHz
Range Resolution	Up to 1/1200 of range setting
Maximum Ping Rate	20 pings per second up to 30m range, thereafter limited by range and speed of sound. Examples: 10 pps @ 50m, 5 pps @ 140m range setting
Power Supply	10-30 Volts, 5 watts max at idle, 10 watts max while pinging
Data Interface	100BaseT Ethernet
Bandwidth	< 0.5 Mbps
Electrical Connection	Single cable with 4 pin JST for data (Blue Robotics Ethernet standard), plus a wire pair for power. Adapter provided for standard RJ-45 ethernet connection.

Parameter	Omniscan 450 FS	Omniscan 450 SS
Maximum Range (Note 3)	100m	150m
Far Field (Note 1)	5m	9m
Beam Width (Note 2)	0.8 degrees	0.5 degrees
Beam Height	50 degrees	50 degrees
Maximum Operating Depth	100m and 300m versions	300m
Weight in Air	440g (100m), 825g (300m)	180g (transducer only)
Weight in Water	-60g (100m), +325g (300m)	149g (transducer only)
Overall Dimensions	55x67x200mm	318x30x20mm

Note 1: Far Field distance is the range beyond which the beam width specification is valid. At nearer distances the effective beam width gets wider, and sidelobes get larger.

Note 2: This is the nominal theoretical 2-way (transmit and receive) 3dB beam width.

Note 3: SonarView will allow range settings out to 200m. Rather than inflate the range specifications here we use ranges at which we have comfortably identified targets.