Cerulean Sonar Docs

Docs Directory Store

Docs Directory Store

Ethernet ROV Locator

Cerulean Sonar Docs SonarView Insight-240 DVL-75 ROV Locator S500 Sounder Omniscan 450 CeruleanTracker Tracker 650 Cerulean Ping Protocol Surveyor 240-16 Omnitrack User Guide Ethernet ROV Locator

Ethernet ROV Locator

Cerulean Sonar Docs SonarView Insight-240 DVL-75 ROV Locator S500 Sounder Omniscan 450 CeruleanTracker Tracker 650 Cerulean Ping Protocol Surveyor 240-16 Omnitrack User Guide Ethernet ROV Locator

ROV Locator
Overview
General Specifications
Quick Start for BlueROV
Fundamentals Useful to System Designers
Configuring the ROVLe
System Variants
Autosync
Communicating With the ROVL
Cerulean Inertial Measurement Unit (CIMU)
- CIMU Calibration Background
Operating and Accuracy Considerations
Multi-Unit Operation (Swarms)
ROVL Mounting
ROVL Wiring
Connecting and Powering Your ROVLe Ethernet Receiver or Transceiver
Mounting Dimensions
ROVL Coordinate Systems and Angles
Appendix: Math for Computing Remote Latitude/Longitude
- Receiver & GPS at Topside and Transmitter Deepside
- Transmitter & GPS Topside and Receiver Deepside
Appendix: Factory Usage Command Set
Troubleshooting
Copyright

Powered by GitBook

On this page

Configuring the ROVLe

Live Status Page

PreviousExample Configuration Web Page NextSetting Device Type

Last updated 13 days ago

Clicking the "Show Status" button on the Configuration Web Page brings up a display of system status, which automatically refreshes every three to four seconds.

An example of this page is shown below. It is primarily intended for troubleshooting by the factory. Yours may look different depending on the firmware version and the system status.