Cerulean Sonar Docs

Docs Directory Store

Omnitrack User Guide

Omnitrack User Guide

Omnitrack User Guide
Quick Start for BlueROV Users
- Omnitrack Basic (Ring Buoy, Wired POE Tether, no BaseStation Plus)
- Omnitrack Basic (Ring Buoy, Wi-Fi Connection, no BaseStation Plus)
System Startup (BlueROV)
Bench Testing and Simulation
Omnitrack Configurations
Standard Blue Robotics Ecosystem Internet Protocol (IP) Addresses
Topside ROV Locator Floatation and Mounting Options
Interface Connection Options for the Topside ROV Locator in an Omnitrack System
GNSS Compass Mounting Dimensions
BaseStation Plus
- Setting Up the BaseStation Plus
Bridging the BlueROV Network and the Omnitrack Network
Installing an Ethernet Switch in a BlueROV Topside Tether Interface
Omnitrack Assembly Instructions
Hints and Tips
Copyright

Powered by GitBook

On this page

Omnitrack Assembly Instructions

BlueBoat/BlueBuoy Assembly

Install Lanyards

PreviousInstall Mounting Hardware NextAdjust Breakaway Latch

Last updated 1 month ago

Lanyards are provided to keep the quick-release-0.25 pins from getting dropped or lost. Use the M4-x45 bolts to attach the tab end of the lanyard to the crossbar, and thread the keyring of the quick-release-0.25 through the loop of the lanyard. Use M6 bushings on both sides of the BlueBuoy's crossbar to isolate the lanyard from the crossbar.