Assemble the GNSS Crossbar
Last updated
Last updated
Insert 2x spring-bushing-oval into strut-gnss-40in as noted below. If you are also installing the optional Wi-Fi module, install 2x the spring-bushing-round as noted below.
Using M4x50 bolts, attach the compass-mount-l and compass-mount-r parts to the ends of the GNSS Crossbar. The parts have nubs on the inside that should click into the holes in the crossbar. Note the parts are mirror images of each other. The side the mounting platforms project from will become the starboard side of the GNSS Crossbar.
Set the GNSS Crossbar aside for now.