📖
Cerulean Sonar Docs
Docs DirectoryStore
Omnitrack User Guide
Omnitrack User Guide
  • Omnitrack User Guide
  • Quick Start for BlueROV Users
    • Omnitrack Basic (Ring Buoy, Wired POE Tether, no BaseStation Plus)
    • Omnitrack Basic (Ring Buoy, Wi-Fi Connection, no BaseStation Plus)
  • System Startup (BlueROV)
    • ROV Startup
    • Tracker 650 Startup
    • ROV Locator Startup
  • Bench Testing and Simulation
    • ROVL Simulation
    • IMU Simulation
    • GNSS Compass Position Simulation
    • GNSS Compass Heading Simulation
  • Omnitrack Configurations
    • Canonical Configuration
    • Wi-Fi Configuration
    • ROV Locator (ROVL)
    • GNSS Compass
    • Power-over-Ethernet Communication
    • Tracker 650
    • Laptop
  • Standard Blue Robotics Ecosystem Internet Protocol (IP) Addresses
  • Topside ROV Locator Floatation and Mounting Options
    • Ring Buoy
    • BlueBoat
    • Blue Buoy
    • User-Supplied Float and Rigid Mount
  • Interface Connection Options for the Topside ROV Locator in an Omnitrack System
    • Interface via a BlueBoat
    • Interface via POE cable
    • Wi-Fi Module
  • GNSS Compass Mounting Dimensions
  • BaseStation Plus
    • Setting Up the BaseStation Plus
  • Bridging the BlueROV Network and the Omnitrack Network
  • Installing an Ethernet Switch in a BlueROV Topside Tether Interface
    • Overview
    • The Tether Ethernet Switch and Cable
    • Connecting to the Tether Network
    • Connecting to the Tether Interface Power
    • Re-Assembly
  • Omnitrack Assembly Instructions
    • General -- Applies to All Assemblies
    • BlueBoat/BlueBuoy Assembly
      • Identify Parts
      • Assemble the Sting
      • Assemble the GNSS Crossbar
      • Install Mounting Hardware
      • Install Lanyards
      • Adjust Breakaway Latch
    • Ring Buoy Assembly
      • Identify Parts
      • Assemble the Sting
      • Assemble the GNSS Crossbar
      • Install Mounting Hardware
      • Assemble the System
    • Attach the Electronics
    • Prepare Wiring Harness
  • Hints and Tips
  • Copyright
Powered by GitBook
On this page
  1. Omnitrack Configurations

Canonical Configuration

PreviousOmnitrack ConfigurationsNextWi-Fi Configuration

Last updated 23 days ago

The canonical configuration includes all the items we recommend for the best performance, as shown in the diagram below. "Included" in the legend means we recommend it for the baseline. "Option" for the BaseStation Plus means the system will work without it, usually with parts included in the BlueROV or BlueBoat or Omnitrack bundles, but you may need to do some MacGyvering. Our online ordering configurator should help you order a "necessary and sufficient" configuration.